Terminals
FM5300
Glonass-terminal FM5300 — is the first GLONASS-terminal in the line of automobile production Teltonika terminals. FM5300 has a built multisystem receiver (GLONASS / GPS / GALILEO) with high sensitivity and low power consumption.
Provided with different interfaces:
- 4 digital entrances
- 4 analog entrances (range 10 W or 30 W, bit 12 bit)
- 4 digital exit of type «open collector» (for connection of external relays, LED of indicators, buzzers etc.)
- 1-Wire® interface
- CAN interface
- USB interface
- 2x RS232 interface
- External GSM antenna
- External GPS antenna
- Audio interface
- 2 LED indicators: “Status” and “Navigate”
- Feed: — 10…30 V DC; are Two modifications of reserve feed : internal or external (with an enhanceable capacity) accumulator with control of charge
Area of applicability
- Positioning, supervision, control
- Help on the road
- International logistic
- Guard (lurking) of the personal car or van
- Management by an autopark
- Monitoring of expense of fuel
Technical descriptions
Frequency range, mHz | 850/900/1800/1900 |
Communication of data | GPRS class 10 SMS (text/data) |
Descriptions of GLONASS/GPS | NMEA — 0183 Receiver 32 channels the High sensitiveness no less — 160 dMb |
Interfaces | 4 digital entrances 4 analog entrances (range 10 W or 30 W, digit 12 bit) 4 digital exits of type «open collector» (for connection of external relays of LED of indicators of buzzers etc.) 1-Wire® interface CAN interface 2 LED indicator USB interface 2x RS232 interface Outdoor GSM aerial Outdoor GPS aerial Audiointerface 2 LED of indicator of «Status» и»navigate» |
Supply | 10…30 V DC Two modifications of reserve feed : internal or external (with an enhanceable capacity) accumulator with control of charge |
Built-in scenarios of work |
Fixation of overspeed Track after behavior of driver on the road (sharp acceleration / braking / dramatic change of corner of turn) Authentication of driver (1 — Wire® iButton ID identifier) |